09-11-2011, 06:35
tibetan you can do pump and hold easily with an NB, that's my method of choice. I personally use the airlocks that NB sells, what I did was ordered 2, one for each dome, I have them connected on each side of the T piece and I pump that way, and also I can adjust the pressure per each dome as well. If you don't want to order the airlocks, what I did before I got them is I would pump until it was tight, then pinch the tubing and clamp it off with a document or chip clip.
Mel C, I've seen that pump before, let us know how it goes.
Mel C, I've seen that pump before, let us know how it goes.