11-02-2011, 12:10
Is Bosom Beauty loosing suction?
January 4 2009 at 1:17 AM xjyoyo (no login)
--------------------------------------------------------------------------------
I bought Bosom Beauty 2012 from gismostore on line in December. It had been working well for me.But from last week, I found that the machine seems is losing suction, it just does not suck as strongly as before. I used can only tolerate the 'SESL' steel at about 10-11 O'clock at most, but recently even I turned it to 3 o'clock position, I feel that the machine is not sucking as strongly as at 11 o'clock position. I tried to connect the clear tube to the Nozzle Two, but the suction from Nozzle Two was too strong to tolerate even I turned the 'SESL' at the minimum position.
So I was wondering that if there is anything wrong with the machine? Or something is wrong with the 'SESL' steel? because I don't feel the suction varies much when I turn the SESL graduatlly?
Author Reply
dory
(Login Dory505) Re: Is Bosom Beauty loosing suction? January 4 2009, 12:32 PM
Where do you live? make sure the voltage matches the Elect. requirements of using the Machine, if your country's voltage is higher or lower u can use a voltage transformer to solve this If this is the problem, it hapend to me once and i fixed it with the Voltage transformer. or else your machine might be broken or something
Edit Message Delete Message
xjyoyo
(no login) I get it fixed January 4 2009, 1:01 PM
Thanks Dory. I live in Australia.
I sent an email to gismostore and got a reply in a few hours. It is said that the machine may be full of moisture, so just use 'suck/spray' setting, I followed the advice, and the machine is now working properly as before.
Edit Message Delete Message
xjyoyo
(no login) loosing pressure again! January 10 2009, 2:20 PM
I am very confused now that Bosom beauty 2012 is now loosing pressure again. I used spray/suck for some time, it seemed improved a bit, the suction was a bit stronger than before using this mode, then the machine began to lose the pressure again, I tried spray/suck setting for 1 hour today, but the suction still does not stronger. The seller said the machine must be likely full of moisture, and suggests me to leave the machine at well ventilated place for 3 days, then use spray/such mode, but it means that I have to halt the session, doesn't it? Has anyone encountered such a problem?
Edit Message Delete Message
Teadrinker
(Login teadrinker10) Re: Is Bosom Beauty loosing suction? January 10 2009, 2:59 PM
I had the same problem and also got told the same thing.I left it for a few days and tried again.It worked for about 10 mins than started losing suction.After reading past posts it is clear these machines seem to go wrong all the time and break down all the time.They are cheap China imports and this may be why.I gave up with mine in the end.I found the machine so painful to use before the machine going wrong that I was quite happy to give up on it.Good luck
Edit Message Delete Message
Louise
(Login Louise1982)
SENIOR MEMBER Re: Is Bosom Beauty loosing suction? January 11 2009, 10:51 PM
Mine was second hand when I got it and is about 4-5 years old. I went through a phase with it where it lost suction, poking a cotton bud around in the port helped a little, also you're supposed to use the left port but I switched to the middle one (careful with this it may be super-strong). Do you use any filters? Getting sweat or body lotion or anything in the machine can damage it - I don't have the filters so just use a long tube so that nothing gets right through. Kieyah may also be able to offer some advice as I think she's had hers quite a while.
P.S. Also check that your domes don't have any hairline cracks, I had a really minor crack in one and could hardly get a seal (thought the machine had packed up) but it's fine with a new set.
xjyoyo
(no login) Re: Is Bosom Beauty loosing suction? January 12 2009, 1:58 PM
Thanks for your response, Louise. I did not use filters or body lotion, I also tried to switch to the middle nozzle, but the suction was too strong for me to tolerate even I turned the SESL wheel at the minimum position, my boobs just turned purple instantly, how can you tolerate such a strong suction?
January 4 2009 at 1:17 AM xjyoyo (no login)
--------------------------------------------------------------------------------
I bought Bosom Beauty 2012 from gismostore on line in December. It had been working well for me.But from last week, I found that the machine seems is losing suction, it just does not suck as strongly as before. I used can only tolerate the 'SESL' steel at about 10-11 O'clock at most, but recently even I turned it to 3 o'clock position, I feel that the machine is not sucking as strongly as at 11 o'clock position. I tried to connect the clear tube to the Nozzle Two, but the suction from Nozzle Two was too strong to tolerate even I turned the 'SESL' at the minimum position.
So I was wondering that if there is anything wrong with the machine? Or something is wrong with the 'SESL' steel? because I don't feel the suction varies much when I turn the SESL graduatlly?
Author Reply
dory
(Login Dory505) Re: Is Bosom Beauty loosing suction? January 4 2009, 12:32 PM
Where do you live? make sure the voltage matches the Elect. requirements of using the Machine, if your country's voltage is higher or lower u can use a voltage transformer to solve this If this is the problem, it hapend to me once and i fixed it with the Voltage transformer. or else your machine might be broken or something
Edit Message Delete Message
xjyoyo
(no login) I get it fixed January 4 2009, 1:01 PM
Thanks Dory. I live in Australia.
I sent an email to gismostore and got a reply in a few hours. It is said that the machine may be full of moisture, so just use 'suck/spray' setting, I followed the advice, and the machine is now working properly as before.
Edit Message Delete Message
xjyoyo
(no login) loosing pressure again! January 10 2009, 2:20 PM
I am very confused now that Bosom beauty 2012 is now loosing pressure again. I used spray/suck for some time, it seemed improved a bit, the suction was a bit stronger than before using this mode, then the machine began to lose the pressure again, I tried spray/suck setting for 1 hour today, but the suction still does not stronger. The seller said the machine must be likely full of moisture, and suggests me to leave the machine at well ventilated place for 3 days, then use spray/such mode, but it means that I have to halt the session, doesn't it? Has anyone encountered such a problem?
Edit Message Delete Message
Teadrinker
(Login teadrinker10) Re: Is Bosom Beauty loosing suction? January 10 2009, 2:59 PM
I had the same problem and also got told the same thing.I left it for a few days and tried again.It worked for about 10 mins than started losing suction.After reading past posts it is clear these machines seem to go wrong all the time and break down all the time.They are cheap China imports and this may be why.I gave up with mine in the end.I found the machine so painful to use before the machine going wrong that I was quite happy to give up on it.Good luck
Edit Message Delete Message
Louise
(Login Louise1982)
SENIOR MEMBER Re: Is Bosom Beauty loosing suction? January 11 2009, 10:51 PM
Mine was second hand when I got it and is about 4-5 years old. I went through a phase with it where it lost suction, poking a cotton bud around in the port helped a little, also you're supposed to use the left port but I switched to the middle one (careful with this it may be super-strong). Do you use any filters? Getting sweat or body lotion or anything in the machine can damage it - I don't have the filters so just use a long tube so that nothing gets right through. Kieyah may also be able to offer some advice as I think she's had hers quite a while.
P.S. Also check that your domes don't have any hairline cracks, I had a really minor crack in one and could hardly get a seal (thought the machine had packed up) but it's fine with a new set.
xjyoyo
(no login) Re: Is Bosom Beauty loosing suction? January 12 2009, 1:58 PM
Thanks for your response, Louise. I did not use filters or body lotion, I also tried to switch to the middle nozzle, but the suction was too strong for me to tolerate even I turned the SESL wheel at the minimum position, my boobs just turned purple instantly, how can you tolerate such a strong suction?