22-01-2024, 20:05
Hi everyone! Just wanted to provide a quick update on what I've found so far.
I found an old thread on this forum about a product called Up'll-D (for C cups and above) and Up'll-D (for smaller than C cups). It seems like it can only be bought from Japanese websites for around $100 USD. It is a very low profile system that looks like a silicone breast prosthesis but is hollowed out so that your breast fits inside. It works like a suction cup to apply gentle constant vacuum tension to the breasts and can be worn for a few hours at a time. The pressure can't be customized. This seems like the lowest profile option around, and falls into the "low and slow" pumping category.
I've also found that cups designed for butt enhancement are often not torpedo shaped. For instance: https://www.amazon.com/Accessories-Meifuly-Upgraded-8-46inch-Extra-Large/dp/B09Z7N3YNN/ref=asc_df_B09Z7NWJGZ/?tag=hyprod-20&linkCode=df0&hvadid=642093401883&hvpos=&hvnetw=g&hvrand=3089268895001499233&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9031923&hvtargid=pla-1933692827946&mcid=0ab0c38c91fc3b6a8e54b6d226e06847&th=1
The issue with this option is that these cups tend to be large in diameter, so they're not suitable for a narrow torso. However, I think with some silicone padding, these might offer a slightly more easy to conceal shape. I'm still looking for some with a smaller diameter and if I find them, I'll share a link!
Finally, I've seen a lot of great threads about DIY domes. From 4" PVC end caps fitted with a nipple to attach tubing, to stemmed plastic drinking glasses with the base cut off and a hole drilled through the stem, there are so many creative options! I may try to custom make some domes of my own, and if I am successful I'll share my process!
I found an old thread on this forum about a product called Up'll-D (for C cups and above) and Up'll-D (for smaller than C cups). It seems like it can only be bought from Japanese websites for around $100 USD. It is a very low profile system that looks like a silicone breast prosthesis but is hollowed out so that your breast fits inside. It works like a suction cup to apply gentle constant vacuum tension to the breasts and can be worn for a few hours at a time. The pressure can't be customized. This seems like the lowest profile option around, and falls into the "low and slow" pumping category.
I've also found that cups designed for butt enhancement are often not torpedo shaped. For instance: https://www.amazon.com/Accessories-Meifuly-Upgraded-8-46inch-Extra-Large/dp/B09Z7N3YNN/ref=asc_df_B09Z7NWJGZ/?tag=hyprod-20&linkCode=df0&hvadid=642093401883&hvpos=&hvnetw=g&hvrand=3089268895001499233&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9031923&hvtargid=pla-1933692827946&mcid=0ab0c38c91fc3b6a8e54b6d226e06847&th=1
The issue with this option is that these cups tend to be large in diameter, so they're not suitable for a narrow torso. However, I think with some silicone padding, these might offer a slightly more easy to conceal shape. I'm still looking for some with a smaller diameter and if I find them, I'll share a link!
Finally, I've seen a lot of great threads about DIY domes. From 4" PVC end caps fitted with a nipple to attach tubing, to stemmed plastic drinking glasses with the base cut off and a hole drilled through the stem, there are so many creative options! I may try to custom make some domes of my own, and if I am successful I'll share my process!