Natural Breast Enhancement Forums

Full Version: Noogleberry the cups don't stay at my breasts
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Hello
My noogleberry came today and I tried it but the cups just don't want to stay on my breast
What do I wrong? I used flaxseed oil under the cups but it still doesn't work Do you have any tipps for me? I'm real frustrated
Even if I hold the cups on my breasts there is no real vacuum created
Did you check for leaks? If you can't get any vacuum at all, it sounds like it might be defective. Otherwise, make sure you're holding the cups flat to your breasts. I sometimes have trouble because the cups are lifted from the skin next to my arms (when I hold them to my chest with one hand).
I agree with Lilly... check for leaks... take the pump off the hose and suck on it and see if you can create any pressure... do each dome and hose separately.... and put your thumb over the pump and see if it works properly... those pumps are cheap and the internal check valve might be stuck open....
Thank you Shy You are right there was a leack in it
Oh, it is SO frustrating at the beginning! Your boobs will get used to them. Start by noogling one at a time. Do one for 10 minutes, then the other for 10 minutes, stop and massage them both for 5 then repeat. They will slowly get used to the dome and eventually you can easily do both together.
(15-01-2014, 08:56 PM)Jenniferlove Wrote: [ -> ]Oh, it is SO frustrating at the beginning! Your boobs will get used to them. Start by noogling one at a time. Do one for 10 minutes, then the other for 10 minutes, stop and massage them both for 5 then repeat. They will slowly get used to the dome and eventually you can easily do both together.
Thank you for your tipps! But my Y-tubing was defective and Lucy will send me a new one Wink I did the tubing from the handpump direct on one cup now and noogle like this till my Y-Tubing come and now it works fine Smile
Well I need some time until my cup stays on my breast but it works Smile
You can take a piece of tubing to the hardware store and get extra.... and a generic barbed Y connector and repair it yourself... only cost a few dollars....